Preparing FKB data to MBTiles: Difference between revisions
No edit summary |
No edit summary |
||
| Line 27: | Line 27: | ||
When all counties are finished, the Maria GDK products NorwayTopoDetail can be updated using the new MBTiles datasets. All products should first be set to "Draft" in Maria Map Maker. Then quit the application, and replace the existing MBTiles file in the "FKB" folder in the product. Restart Maria Map Maker, and inspect the overlays. | When all counties are finished, the Maria GDK products NorwayTopoDetail can be updated using the new MBTiles datasets. All products should first be set to "Draft" in Maria Map Maker. Then quit the application, and replace the existing MBTiles file in the "FKB" folder in the product. Restart Maria Map Maker, and inspect the overlays. | ||
=== Troubleshooting === | |||
The workspace described here depends on the naming convention of file names, layer names and attributes in the source data. Unfortunately, these names are often changed by Kartverket from one year to the next, which usually results in errors or missing layers in the resulting datasets. Troubleshooting this is the most time-consuming part of the process. When a layer is visibly missing in the result, a good starting point is to closely compare the source data with the result. | |||
The process for each county will write its log file next to the workspace (fmw) file. These often give clues of the error. | |||
== Elveg == | |||
'''Elveg''' is a dataset representing the road network in Norway. In '''NorwayTopoDetail''' we use the road center lines to label road names and numbers. The Vbase line features themselves are not visible in the map. | |||
We create Elveg as a separate MBTiles dataset from the base data. However, it is split by fylke in the same way. | |||
Our starting point is one zipped Elveg GML file for each fylke. We use the FME workspace '''gml2mbtiles_Elveg2.0.fmw'''. | |||
After running the workspace, you should have one MBTiles file for each fylke, which replaces the MBTiles files in the existing '''NorwayTopoDetail''' products. | |||
== Matrikkelen - Adresse (Adress labels) == | |||
Points representing street adresses. It is placed in each '''NorwayTopoDetail''' as a separate dataset in the same way as '''Vbase''' | |||
The starting point should be one zipped GML file for each fylke. Use the FME workspace '''gml2mbtiles_matrikkel-vegadresse.fmw'''. After running the workspace, you should have one MBTiles file for each fylke, which replaces the MBTiles files in the existing '''NorwayTopoDetail''' products. | |||
[[Category:Preparing data]] | |||
Revision as of 14:56, 8 March 2022
This guide shows how to process FKB and related data into vector MBTiles datasets using FME 2021 or newer. The result are split into counties. Each county will consist of 3 MBTiles datasets:
- FKB
- Road names (elveg)
- adresses (vegadresse)
FKB
Source data must be downloaded from Geonorge with a valid BAAT user. The large amount of data makes it neccessary to use the tool MassivNedlasting from Kartverket. The following map themes should be downloaded into a single folder. Each theme should consist of one zipped ESRI file geodatabase for each county except for N5 Presentasjonsdata, which as of 2022 is only available split into municipalities.
- FKB-AR5 FGDB-format
- FKB-Arealbruk FGDB-format
- FKB-Bane FGDB-format
- FKB-BygnAnlegg FGDB-format
- FKB-Bygning FGDB-format
- FKB-Ledning FGDB-format
- FKB-LedningVA FGDB-format
- FKB-Lufthavn FGDB-format
- FKB-Naturinfo FGDB-format
- FKB-Servitutt FGDB-format
- FKB-Tiltak FGDB-format
- FKB-TraktorvegSti FGDB-format
- FKB-Vann FGDB-format
- FKB-Veg FGDB-format
- Matrikkelen - Eiendomskart Teig FGDB-format
- N5 Høydekurve FGDB-format
- N5 Presentasjonsdata FGDB-format
When all files have been downloaded, use the FME workspace workspacerunner.fmw. Fill in the user parameters input and output. It is also possible to select which counties to process using the parameters Fylker. Runtime will vary, but all of Norway will be at least 12 hours.
When all counties are finished, the Maria GDK products NorwayTopoDetail can be updated using the new MBTiles datasets. All products should first be set to "Draft" in Maria Map Maker. Then quit the application, and replace the existing MBTiles file in the "FKB" folder in the product. Restart Maria Map Maker, and inspect the overlays.
Troubleshooting
The workspace described here depends on the naming convention of file names, layer names and attributes in the source data. Unfortunately, these names are often changed by Kartverket from one year to the next, which usually results in errors or missing layers in the resulting datasets. Troubleshooting this is the most time-consuming part of the process. When a layer is visibly missing in the result, a good starting point is to closely compare the source data with the result. The process for each county will write its log file next to the workspace (fmw) file. These often give clues of the error.
Elveg
Elveg is a dataset representing the road network in Norway. In NorwayTopoDetail we use the road center lines to label road names and numbers. The Vbase line features themselves are not visible in the map.
We create Elveg as a separate MBTiles dataset from the base data. However, it is split by fylke in the same way.
Our starting point is one zipped Elveg GML file for each fylke. We use the FME workspace gml2mbtiles_Elveg2.0.fmw.
After running the workspace, you should have one MBTiles file for each fylke, which replaces the MBTiles files in the existing NorwayTopoDetail products.
Matrikkelen - Adresse (Adress labels)
Points representing street adresses. It is placed in each NorwayTopoDetail as a separate dataset in the same way as Vbase
The starting point should be one zipped GML file for each fylke. Use the FME workspace gml2mbtiles_matrikkel-vegadresse.fmw. After running the workspace, you should have one MBTiles file for each fylke, which replaces the MBTiles files in the existing NorwayTopoDetail products.